Knifemaking: on hitting your mark, and The Crack Shot

December 16, 2020December 21, 2020 / ballardmidyette / Leave a comment

“Each arrow leaves a memory in your heart, and it is the sum of those memories that will make you shoot better and better.”

Paulo Coelho- The Archer

A few years ago I went to go see a modern dance piece with my girlfriend. It was called “Tensegrity” and was based on the idea of tension in cells: wherein the structure of the cell is maintained through continuous tension in some of it’s supports and continuous compression in others. When any one of those tensions or compressions are interrupted the cell falls apart, or at least that’s my understanding of it. This idea has been around since the 1960’s, and is a portmanteau of “tensile” and “integrity”. These days the idea is used a lot in contemporary architecture and to make coffee tables and other furniture. There are loads of these tensegrity tables and sculptures on Pinterest, but the first I had ever heard of this was at that performance.

The choreographer of this piece is a good friend of of ours and after the performance we went to get a drink with him. I’ve always admired how prolific he is, constantly moving from piece to piece, work to work, and the way each performance had it’s own voice and character. I was a bit stuck at the time and was curious how this man could take shot after shot and always hit his target. So I asked him.

He told me that whatever you do, you have to do a lot of it, and sometimes badly. Everything is connected, he told me, and each piece builds off what you have done before and is fed by your collective experience. Always keep going, and always be thinking of what’s next. At least I think that’s what he said; a fairly liberal number of martinis and fireball shots were consumed and things started to get a little fuzzy…

Over the years I’ve thought about that night, and how seemingly incongruous disciplines fit together to propel a skill or craft forward. You hear about football players taking ballet but I met an orthopedic surgeon who was an ace pickle maker, and one of my favorite knifemakers is an avid botanist. So when you find choreographers exploring contemporary cell biology or bowhunters dabbling in Vipisanna meditation, you will probably find that they are drawing connections that are deepening and balancing something. Whenever I talk to people who are really good at what they do, I find there is an ocean of eclectic and varied experiences just beneath the veneer of whatever it is they practice that adds something special to their work. The sum of our experiences can always help us hit our mark.

The Crack Shot is a nod to this idea that the sum of our experiences can always help us hit our mark. It was built for a hunter and a woodsman. “Crack Shot” is an homage to his grandfather, the original Crack Shot, who taught him about being with nature, shooting, and how to hit your mark. It is the intention of this knife, with it’s blend of handmade and reclaimed material, to help it’s recipient remember the man who helped him be where he is today.

Grinding in the bevels and swedges. Since this is thick stock, the swedge will make a finer point for piercing.

Removing the machine grinds by hand. This will make polishing easier after heat treatment.

After tempering- note the faint straw colors. This has drawn much of the stress out of the blade that built up during quench, making it much more durable.

The client wanted something masculine and woodsy. I find there are few things more timeless that flannel and denim.

Alternating layers, so each piece should form a grain and be able to speak more articulately.

Each layer of clothes is smothered in fiberglass resin.

This is the raw material. All the layer have been permeated with resin, making everything a solid block.

A rough mockup so I know how everything fits together.

This gets sanded before glue up. I won’t be able to get to this part after everything is glued and riveted together.

A piece of block walnut. I was doing tree work at an artist’s house in Charlotte Court House, Virginia. He had loads of this stuff. It was milled by his neighbor, a retired parishioner who started an abbey in South Korea in the late 1990’s to help North Korean defectors acclimate to a free country. It is very beautiful wood.

A fiberglass PCB blank for a network chassis full of hardware that runs your internet. This was rescued from a dumpster.

All laid out and everything fits together.

The Crack Shot is made of high carbon steel, which means it will take a keen edge, hold it a good while, and will be easy to sharpen. It will stain and patina and tell the stories of the places you’ve been- this natural and characteristic of the steel. Your knife is made to be used so don’t be shy about getting it dirty. Be sure to keep your knife clean and oiled when not in use. Should you find any unpleasant surface oxidization you can remove it easily with a lightly oiled bit of 0000 steel wool, or a coarse rag with a bit vinegar on it.

Some further reading on cellular tensegrity referenced in the text body above:

Constructing Tensegrity Structures From One-Bar Elementary Cells

Knifemaking: softening and connection; and the Gun Dog

November 11, 2020December 10, 2020 / ballardmidyette / Leave a comment

“How we fall into grace. You can’t work or earn your way into it. You just fall. It lies below, it lies beyond. It comes to you, unbidden.”
― Rick Bass, Colter: The True Story of the Best Dog I Ever Had

I wouldn’t have ever really considered myself a dog person, not really. There is an appreciation and respect for all animals, both wild and domesticated, and whatever creature I meet I try to let them know that I see them- a deep namaste and acknowledgement of being. But as far “being a dog person”… I’m just not sure I have whatever that is.

A couple of years ago my girlfriend said she was thinking about getting a dog. I told her don’t do it. My only reasoning was that we were all very busy doing interesting and challenging work, her kids were getting older and doing more things, and everyone was tired all the time. I figured it would probably be best if we held onto every ounce of emotional energy that we could.

In spite of my reasons, which themselves came from a lovingly practical and pragmatic place, she did not listen to me. This lady is one of the most unfailingly capable people I know, a wonderful mother, with the uncanny ability to make everything around her better than it was before, even on her worst days. It was no surprise when she brought home a several-month-old rescue puppy. This dog was a lemon drop beagle mix with the biggest ears I’d ever seen. She seemed to be equal parts fruit bat, luck dragon, and polar bear.

The local animal league had told my girlfriend that this dog and her sister had been found abandoned in a barn. The puppy’s sister had some sort of severe muscular dysplasia and had found a home. My girlfriend’s puppy had a little bit of this, but much less so. She moved around fine but a closer look showed her front half didn’t quite work together with her back half.

When I met her she was still adjusting to her new home. She was terrified of doorways and dinner plates. She didn’t want to leave whatever room she was in and when she did she scuttled through like something was going to get her. If you were to put down a plate of puppy chow in front of her she would back away as if it were going to bite her. In spite of all of this she was a deeply loving and affectionate dog which was amazing considering the shit sandwich of a beginning she had been given. At that moment, shortly after meeting this dog, I felt something soften toward this wonky little barn dog that was part fruit bat, luck dragon, and polar bear; this sweet little creature that I told my girlfriend not to get.

Over the next few years I would tell this dog that I was sorry I told her mom not to get her. She had grown into a rather stunning animal, and her front half worked together much better with her back half. Doorways weren’t too much of a problem though her old nemesis the dinner plate still gave her pause. I found myself very attached to her and, though she was very much a lady dog and a product of my girlfriend’s deep nurture, I would find her to be the loving presence that I didn’t know I needed. The dog just loved everybody.

A couple of years ago I had a table saw accident that left me needing reconstructive hand surgery. It was incredibly stressful and emotionally grueling. All of my work and projects and everything I was so busy with would come grinding to a halt for the next few months. My girlfriend moved me into her house for a week and took time off work- thankfully the kids were away at summer camp. My girlfriend’s dog never really left my side. I remember the dog licking my gimpy hand every so often and then pressing in to me and going to sleep, which prompted me go to sleep. I don’t remember much of that week, except my girlfriend smiling and her really sweet dog. It sounds really silly, and perhaps it was the massive amount of post-op hyrdromorphone I was prescribed, but I figured I should probably take the example of the dog that I told my girlfriend not to get and find a way to dig in a little deeper with her and the kids.

Connection can be a struggle and there’s no manual on the right way to go about it. Sometimes it takes a sweet dog after a traumatic event to help you see what you should be doing. Part fruit bat, part luck dragon, part polar bear (everybody is good and healthy, including my hand and the dog I told my girlfriend not to get). If a responsible adult in your life tells you they want a dog, you should tell them to go right ahead.

This knife was commissioned for a retired gentlemen who trains English Setters for hunting. Hunting Dogs, or Gun Dogs as they are called have been around for centuries. Particularly, the training of Setters can be traced back to Robert Dudley, the Earl of Leicester in the 1500’s. It was commissioned by a loving daughter, and has “Pop Pop” etched on the flat of the blade from his grandchildren.

Removing material in the handle make for a more balanced blade.

Everything profiled out. Being that it is made from thinner stock, it will go in the forge as is to prevent warping during hardening.

The blade needs to come to critical temperature, which is around 1500F. By the colors you can see that it is almost there.

After the quench. There wasn’t warpage but I still clamp it in the vise at the areas where it would typically bend. When it comes out of the oil it is around 300-400F, and during this time any major warps can be corrected before it cools.

The bevels have been ground in and machine finished to 120 grit.

This has been hand sanded up to 600 grit, finishing with vertical pulls. This will get etched in acid to provide a scaffold for the patina to build, and also give it a more rustic look.

Electro-chemical etching using nail polish, some salted vinegar and a nine volt battery with some alligator clips. This allows me to essentially burn text onto the steel.

A pair of Carthartt work dungarees, probably about 10 years old.

Instructions for Care:

Your knife is made of high carbon steel, which means it will take a keen edge, hold it a good while, and will be easy to sharpen. It has been etched in acid and shipped to you coated in food safe mineral oil. It will stain and patina and tell the stories of the places you’ve been. Be sure to keep your knife clean and oiled when not in use. Should you find any unpleasant surface oxidization you can remove it easily with a lightly oiled bit of 0000 steel wool, or a coarse rag with a bit vinegar on it. She is built to be used, so don’t be shy about getting her dirty.

You can read more about Gun Dogs here, as well as find more resources on this very old tradition

Knifemaking: a commencement address (of sorts), and the Masilda

June 26, 2020July 27, 2020 / ballardmidyette / Leave a comment

Dear Younger Person Whom I’ve Never Met Before:

Some very dear friends of mine asked me to make a knife for you. These friends of mine are wonderful people that I have known for quite some time, and shared many adventures. They told me they have known your parents for a long time as well, so I can infer that your parents are wonderful people too. They have also known you since you were born and, if I may be so bold, I can only assume that you are a wonderful person as well, and that we are well met.

I was also told you have completed your secondary studies and are going out into the world- congratulations! My very dear friends asked me to make you something special, but also something that was functional and practical. Something that would serve you well on outdoor adventures; an elegant tool and faithful companion. Something to remind you of where you have grown up. A security blanket that doubles as a prayer rosary and, if I may say so, a bold fashion statement.

As you may have noticed, Younger-Person-Whom-I’ve-Never-Met-Before, the situation of the world is a bit spicier than usual. To be honest, the only thing that has gotten me out of the house most days in this great year of 2020 is knowing that I will be coming back home as soon as possible. In spite of my trepidations of late, I’ve found that time marches on and life stops for no one, and there’s no point in staying home and being afraid while life passes you by. The world cares not for our anxieties, worries, or fears, Younger-Person-Whom-I’ve-Never-Met-Before, and the sooner this is understood the freer we become. Be sure to wear a mask, practice social distancing, and listen to the experts. That is what they are here for.

I have designed and built you a bushcraft knife. She is made from 1095 hi-carbon steel, which has been differentially hardened. What this means is, while the whole blade is hardened, the cutting edge is the only part of the blade at full hardness and the spine is just slightly softer. This offers durability and a slight bit of give, like a samurai sword. There is a smoky line along the edge of the blade and a slight color change where you can see the differences in hardness.

The handle contains a piece of bookmatched Texas Mesquite. It comes from a cousin of mine near Big Springs, milled on his property. The bolster is made from a pair of lady jeans that belonged to my girlfriend- vintage Levi’s 501’s, something strong and deeply feminine. Your knife is stout and sturdy; strong enough to baton firewood but lithe enough to prepare dinner.

I named her Masilda, which is an old Romany-Traveller name that means ‘battle-ready’. And while I am no authority on anything, your knife does contain a few truths and values in which I strongly believe. Having a knife named battle-ready is no empty moniker and I have consolidated a trifecta of practices and that you may find useful in navigating a complicated world. When you use your knife I hope that you think of them:

-Speak your truth. The media says that we are in the post-truth era, an age of alternative facts, and other dressed-up horseshit designed to keep you from critically analyzing what’s going on around you. The reality is that the truth always matters, and always will. Make sure you know your own truths- the things you know to be right and good about yourself and how you see yourself in the world. Clothe yourself in them. Should you ever feel lost you’ll know exactly where they are- they will help you find your bearings.

-You can always make more money, but you can’t make more time. Time is the currency of our terminal human experience. While making a living is necessary, be aware of how much of your time you sell to a job that only cares about profit margins and what they can squeeze out of you. If you ever have any doubts about what you should be doing with the time you have been given, refer to the above bullet point. You’ll know what to do and you’ll be able to hold yourself in esteem while doing it.

Be kind. It’s sounds cliche, like something written on a shoddy mass-market pressboard wall decoration in the Housewares Section of Target, but do your best to be kind. It’s the connective fiber of our collective human experience during our brief time on this lovely little world. If you can, you will find that the world opens up to you a bit easier, and is perhaps a bit richer and more vibrant. There may be situations you need to tell someone to eat a big bag of shit. Only do so out of kindness.

Wishing you many happy years with the Masilda.

The Masilda started with a drawing, a drop point style:

I had a bigger piece of steel than I thought, so the actual knife is a bit longer than the drawing:

Jimping- to prevent slipping when choking up on the blade:

Rough grinds:

Wet-sanding out the machine marks:

The hardening process:

After quench:

After tempering, a satin finish:

A pair of vintage lady jeans from my partner, deeply-loved and well-worn:

Fiberglass resin will be layered between pieces of denim, like a lasagna. The pathc will go in as well:

Now smash the whole thing together:

The raw material:

Cut and drilled in, with the blade profile traced in so that i know where everything is:

Texas Mesquite:

It smells really good:

Computer board blank rescued from a dumpster. It’s just a thin piece of fiberglass board:

Denim and computer board at 60 grit:

At 800:

All ready for glue up:

Glued and clamped

Shaping up:

From here, all the sanding is done by hand:

The higher the grit you go, the more pronounced the grain and fiber:

The Masilda:

Instructions for Care:

Your knife is made of high carbon steel, which means it will take a keen edge, hold it a good while, and will be easy to sharpen. It will stain and patina and tell the stories of the places you’ve been. Be sure to keep your knife clean and oiled when not in use. Should you find any unpleasant surface oxidization you can remove it easily with a lightly oiled bit of 0000 steel wool, or a coarse rag with a bit vinegar on it. She is built to be used, so don’t be shy about getting her dirty.

Knifemaking: having a quiet day and the Woodsman, Mark Deux

July 19, 2018July 23, 2018 / ballardmidyette / 2 Comments

‘In silence there is eloquence. Stop weaving and see how the pattern improves.’

-Rumi

From mid-January to mid-June of this year everything had been a blur. I was running from job to job, gig to gig, knife to knife, trying to stay on top of everything. Every time that I felt like I had room to breathe, something else would come up. Car repairs, state taxes, doctors’ visits, new tools. It was always something and I was hustling left and right, making sure everything was moving forward and getting taken care of.

Then I had an accident that pretty much stopped everything.

I injured two of my fingers pretty seriously on a table saw. I was cutting some very thin material when the saw bound up and kicked, and I couldn’t get away fast enough. The shop is at my partner James’ house and he happened to be home when this happened. I quickly grabbed a dirty towel and, doing my best not to panic, politely yelled that I needed to go to the ER, right that second.

On the ride to the ER, which was about twenty minutes away, I took stock of the situation. James, who teaches shop and technology education, asked me to double check that my fingers were still attached and not on the floor of the shop. Indeed they were still attached. I would be told later that I was very lucky to keep my fingers- none of the major tendons or arteries were damaged beyond repair.

I do my best to practice calm in my life. Strong reactions happen from time to time, and the best way to deal with them is to feel them, let them pass, and address what caused the strong reaction in the first place. This is an incredibly challenging thing to do and I don’t always do it well but I’ve gotten better at it over the years. On the ride to the ER I found impossible to calm down. I noticed that my thoughts were manic and erratic and I had trouble breathing normally. I felt a pretty deep sense of guilt and shame, as if I had this coming because I wasn’t slowing down. A doctor would later tell me that what I had experienced was an acute stress reaction and was normal for what I had experienced, largely in part from the sheer volume of adrenaline and other chemicals that my body had released.

The ER was a miserable experience. The ER doctor told me they would need to operate but they would need to transport me to another facility because there was no one covered by my insurance at that particular hospital. Nobody even looked at my fingers and I sat on a hospital bed and bled on myself for two hours before someone gave me any pain medicine. The paramedics finally arrived and bandaged my hand- the first time anyone had done anything. They pumped me full of IV fentanyl before loading me onto an ambulance to go to another hospital. Those guys knew how to get shit done, and in my very stoned state I kept telling them how glad I was that they were there.

We got to the next hospital, and my girlfriend met me there. In my state of shock I had forgotten my phone at the shop and James had called her. I was really glad she was there because it would be another four hours before the surgeon showed up. As it turned out he was not covered by my insurance either. Somebody had screwed up.

The worst part about the ER is that you are forced to make life-altering decisions when you are in a state of shock, and/or heavily medicated and not in your best of faculties. The surgeon gave me the option of going ahead with surgery but understood if I didn’t want to- he was very kind and professional, and pretty pissed that this was the way the system was working. I opted not to have surgery that night because it would have medically bankrupted me. I would never have been able to pay that kind of money back. I would have to find another surgeon on my own. He cleaned and temporarily stitched me up enough so that I could safely leave, which involved two incredibly painful nerve block shots and a pretty shoddy cast courtesy of the ER nurse- I think it was her first. By the time we left, my pharmacy had closed and the hospital wouldn’t send me home with any medication. I had to make it the night without pain pills or antibiotics (I would end up taking 2000mg of Keflex a day for 20 days- I was so filthy when I went in they were afraid I was going to give myself sepsis). We went home and tried to get some rest, because the next day would be busy.

I think this was what it looked like when the system fails you.

……

The next morning we got on the phone. We called my insurance company and they found a place that would take a look at me right away. Ironically enough their office was located at the first hospital I had gone to the day before. I met with an orthopedic surgeon and his nurse practitioner.

I found out that orthopedic surgeons do a lot of hip and knee replacements on the elderly, so when a young person comes in with an exciting injury everyone wants to see. I had no less than six people come and look at me, all very excited.

The doctor was really excited to work on me- he was an artist and I was his canvas. He drew me a picture of the procedure he would do and explained the whole thing. They were going to fuse the middle joint of my index finger which the table saw had blown out, and remove a bit of my thumb. I got another two painful shots of nerve block while he examined everything and moved some things back into place. There aren’t a whole lot of words to convey how painful those shots are- I nearly crushed my girlfriend’s hand with my good hand. My surgery would be two days from then, and they told me to rest. So that’s what I did.

I have always had trouble finding quiet places and allowing myself to rest. Now I had no choice. I called my work and told them what happened and that I wasn’t sure when I would be back in. I had to cancel some contractor work and push back a lot of client work. That was what hurt the most. My girlfriend and I watched a lot of Netflix, something we rarely ever do together. I don’t watch a whole lot of TV but over the next week I would watch more TV than I had in the past five years. And honestly it was really nice to check out. I slept a lot and took pain medication and was generally kind of dopey. I told my girlfriend that she was beautiful and I loved her, frequently. I couldn’t bathe myself, or put my contact lenses in, or dress myself. I just had to surrender to everything and let myself be helped.

…..

Two days later we went to have surgery done. I have never had any surgical procedure done before and was really nervous. They took me in the back and had me put on a hospital gown and fixed up an IV in me. After a large bump of a sedative they gave me a giant nerve block shot in my shoulder, which made my entire arm go numb. I was dopey but still semi-conscious when they wheeled me into the OR. They had music piped in- Bryan Adams was playing. From what I understand of these things, the anesthesiologist has you count backwards from one hundred till you knock out. Apparently they didn’t do this with me- I knocked out on my own singing ‘Heaven’ from Canada’s most famous musical export. I think this was an auspicious sign.

…..

After surgery everything was kind of fuzzy. We went home and my girlfriend put me in her bed and told me not to get up while she went to pick up my prescriptions. My entire left arm was completely numb from the nerve block and I remember being really hungry. Apparently I got up and ate an entire box of her kids’ Pop-Tarts while she was gone and then swore to her that I didn’t. There were Pop-Tart wrappers all over the place- I don’t remember any of this. I slept a whole lot and my dead arm, which I was supposed to keep elevated, kept falling and hitting me in the head. I had a whole pile of pills that I had to take and my girlfriend dutifully kept me on a tight schedule. The best I could do was tell her that I loved her and tell her how beautiful she was.

The next four days passed like that. She took off from her high stress-job and looked after me. She helped me bathe, made sure I was taking my medicine, and kept me fed. I would get really weepy from time to time. It was all a lot; the trauma from the accident, the bone-deep pain from the surgery, and the bills that would be coming (because even with insurance these procedures are very expensive), and the people I felt I had let down. Then there was this really wonderful woman taking care of me telling me that it was ok and how well I was doing. The pain medication peeled away all of the armor I usually wear to function in the world and so from time to time all of this would hit me and I would just sit there and cry.

A few days later we went to clean up my apartment. I had gotten off the major pain killers to see how my hand was doing so I could get back to my day job. In situations where there is a caregiver and a care receiver things can turn toxic and codependent— I’ve seen it happen. The pain pills can be addictive and I didn’t want to be a patient or lean on anyone if I didn’t have to.

I had a couple of my friends come over to help. I couldn’t really do a whole lot. My girlfriend spent two hours cleaning my shower- a knifemaker’s shower can get really dirty. One of my friends washed all my dishes for me. James had let me keep my car at his place till I could drive again, and I finally went and picked it up. And I started going back to work.

……

My two fingers have been in special splints as they heal, so I’ve been doing everything with eight fingers instead of ten. All the simple things I do that I never think about, like brushing my teeth or packing a backpack or making a sandwich, suddenly require a lot more thought and take twice as long. It’s really draining and frustrating and a full day of that makes me really tired.

One thing that continually catches me off guard is the amount of help that is available. Whenever there is something I can’t do there is always someone right there to help. Shortly after the surgery I was working a large concert and I had trouble getting a pack of snack crackers open. I had to grab a union stagehand, an older gentleman with a long white ponytail, and ask him if he could open my crackers for me. “Well sure brother,” he says. “Everybody needs a little help now and then.” Cue waterworks from me.

Getting back into the shop has been scary, and a slow process. I was in the middle of this knife when I injured myself and I had to keep emailing the client to push back when I would have it finished. I did all of the woodworking and leatherwork with eight fingers. It’s been an exercise in leaning into fear and getting back on the horse.

I tend to have a lot of quiet days of late. Quiet days allow everything to settle and help one’s focus to reset and help one to cultivate a sense of gratitude. They also allow for deep processing and healing. This is also lesson of the Woodsman. Any good person of the Woods knows how to find quiet and the goodness that comes from within. The second part of this build has been an exercise in just that.

O1 tool steel, out of the forge:

Hand sanding:

Computer board for the spacing material:

Mesquite from Texas for the handle:

All profiled:

Rough shaped on the grinder- from here out it’s all hand work:

This is at 220 grit:

Letting a bit of oil set in to help the grain to speak:

The Woodsman, Mark II:

Knifemaking: being your own cheerleader and the Stag

November 23, 2016December 15, 2016 / ballardmidyette / Leave a comment

“You’ve just got to pat yourself on the back and keep moving. Ain’t nobody else gonna do that for you.”

-Gordon Russell, chef

The other week, early in the morning, I got a knock on my door. It was the police. My car alarm had been going off for the past hour and the officer said there had been quite a few calls about it.

We walked over and I turned the alarm off and disconnected the battery. As the officer was leaving he said that someone had been kind enough to leave a note for me on my windshield. I found a piece of paper under the wiper and read it. I’m not sure what I was expecting. After I read through all of the expletives, I saw that it was signed by “I Hate You”.

Beautiful. Somebody hates me.

I tried to go back to sleep but I had a hard time. I knew I wasn’t the first person to have their car alarm go off and I probably wouldn’t be the last but I was having a hard time figuring out what “I Hate You” expected to accomplish through their eloquently worded salutation to me. Those sorts of things written to you by a stranger don’t feel nice.

Later in the day I found it to be really funny. I kind of wish I had kept the note.

So what do you do when you find yourself on the receiving end of toxic outrage? Or of violent vitriols or virulent viscosities or even vicissitudes of the most vicious varieties?? This is where you have to be your own cheerleader. Because we’re going to screw up at some point, maybe say or do something in poor taste or offend someone’s sensibilities. People can be awful- much worse than notes on cars. And hiding behind the veil of social media, people often write things that they wouldn’t necessarily say to someone’s face. So when someone says or does something dumb, it can be often accompanied by a slurry of shame-dumping and rage. Before long any sense of civility or compassion goes out the window. If you find yourself on the receiving end of these sorts of shenanigans, it’s best to pat yourself on the back and just keep rolling. These are the hard things to master in life, but they are worth it. It’s important to keep moving forward.

This blade was a commission for a gentleman who is a cheerleading coach. His wife asked if the knife could have an essence of an old Buck fixed blade he had as a kid so I took that into the consideration of the design. ‘The Stag’ is a bit of a double entendre. In the animal world a stag can be much larger than a buck, and this knife has a bit more heft than its commercial counterpart. But on the other side you sometimes have to go stag, by yourself, and give yourself the things that the world is not always going to give you.

The other day I was working with a lady who was late because someone parked her car into her spot. She said she didn’t even have time to write a nasty note. I very gently told her that not writing that note was probably for the best…

I did two designs for this knife, based on some of the Buck fixed blades. I went with the bottom drawing:

Wet sanding:

This is after heat treat, slag all removed, at about 600 grit:

Satin:

Walnut for the handle:

The Stag: O1 tool steel, Walnut handle scales, fiber spacers, and steel hardware:

In the words of a dear friend, just pat yourself on the back and keep moving

Much love to Kent Huffman for the beautiful leatherwork and to Taylor Huffman Bernard for the beautiful woodburning. Finished knife photos by James Bernard and his superior camera.

Knifemaking: when things break down and the Skin Yer Dinner

June 1, 2016June 7, 2016 / ballardmidyette / Leave a comment

“The place to improve the world is first in one’s own heart and head and hands and then work outward from there”

Robert M. Persig- Zen and the Art of Motorcycle Maintenance

One of the major lessons of life is that things are going to break down. It doesn’t matter how well the schedule of maintenance is managed, no matter how well oiled and lubricated all the moving parts are, or how diligently things are inspected.

At some point or another things just aren’t going to work the way that they are supposed to and sometimes it takes more than just ourselves to get them repaired.

As I’ve gotten older I’m a little more mindful of this. Sort of. It’s been a bit of a process actually. I do my best to not let my things go to shit. Some of those things are easier for me to do than others but it’s definitely better than it has been in the past. Part of this tendency to let things go to shit comes from living in a consumer society. Things aren’t necessarily built to be repaired. They are meant to be consumed and thrown away. If it breaks, buy something newer and shinier and better. Fixing things takes time and often it is very appealing to go and buy a new one rather than repair what you have as best you are able. This notion goes for more than just our material possessions.

Sometimes I find myself having to repair things that I have let completely go to shit. Sometimes it’s in my professional life, sometimes it’s in my relationships, sometimes it’s my truck. It’s important to not beat yourself up (or anybody else) when something goes to shit, which it inevitably will.

My truck. I like to drive mid to late ’90s Japanese midsize SUVs because they perform really well, are built on truck chassis, and are relatively easy to fix and find parts for. Sometimes it’s a little stressful because I don’t always know what I am doing and turns into an exercise in not over-thinking. It’s also an exercise in observing how you operate when things aren’t working as they should. I did a brake job the other month. I’ve never done my own brakes before but the idea of saving a couple hundred dollars sounded good. The passenger side wheel took me two and a half hours- during which time I removed the entire brake caliper by mistake, and accidentally drained all of the brake fluid. The driver side wheel took me 45 minutes. After several attempts to bleed my brake lines of the air inside on my own, I had to take my truck to my mechanic who talks to me like I am ten years old (‘Son, why the hell did you disconnect the brake line?’).

In taking on these sorts of projects, I go through the entire spectrum of human emotion and always become more intimate with myself. It’s important to trust yourself, and to let go of the fear that you will screw something up more than it already is. To take that intention of helping something to do what it does and to manifest that into whatever you are working on.

The intimacy thing- it goes for more than knowing just yourself. Sometimes I have help on these projects. Sometimes I help those close to me on their things. It’s good to have someone who can pick up on something you may have missed, who can help you laugh, and help ease your anxieties. In these situations a lot of the masks come off and you can really get to know someone without pretense or pontification because there is a common goal. It’s reassuring knowing that when something goes wrong you can help yourself, or help somebody else, or be helped. The deeper lesson is that things will always break down, ourselves included, but they don’t have to stay that way.

This blade was a commission for a fourteen year-old boy, the son of a really wonderful friend of mine who is an HVAC technician, someone who in his professional life brings the broken and neglected into good working order. The other week my girlfriend and I were working on her HVAC system which had gone out. We put a new fan motor in and were a bit hesitant on the wiring. I called my friend, who came over and wired up the motor and rewired the thermostat on pretty short notice. His son was with him and asked me for a knife… and also asked that it be called the Skin Yer Dinner…

I started with a piece of 1095 spring steel…

Hardened

A bit of Texas River Ash…

The Skin Yer Dinner: Etched 1095 spring steel, Texas River ash handle, Kydex spacers, and brass hardware. I also threw in a custom Kydex sheath…

Things break down and it’s a part of life…but so is figuring out how to get them working again.

Knifemaking: playing your hand and The Wild Card

April 14, 2016December 9, 2018 / ballardmidyette / Leave a comment

“Like I said, I’ve got mixed emotions about wild card games. In one sense, they tend to bring out the gamble in your opponents. They often create a carnival of excitement in which players give away a lot of money painlessly. On the other hand, it’s hard to calculate a strategy for a game the dealer has just invented.”

Doyle Brunson- According to Doyle

I think the best definition of a wild card is something that can be what you need it to be, when you need it to be. I have a friend like this- his name is Fred and I’ve written about him before. I worked with Fred at the warehouse dealing with restaurant equipment. During the tenure of our professional and personal relationship, Fred has set me on fire, twice, helped me fix my car, helped me fix my friends’ cars, helped me fix my girlfriend’s house, and showed me how to fix things I had no idea could be fixed. The man has infuriated me beyond belief and has also made me laugh till I cried. Fred is a wild card, a deus ex machina, the kind of person who can accomplish incredible things and can do it, most of the time, without having any sort of concrete plan. Which makes it that much more infuriating to work with him and can also result in being set aflame…

I’ve always had this paradoxical sense of simultaneously feeling incredibly safe and slightly on edge whenever I worked with Fred. We would go into jobs and everything that could go wrong would absolutely go wrong. Somehow Fred would figure it out. There was the time a one day job turned into three at a federal office building near downtown Washington DC. A Japanese restaurant on the floor level of a building on Glebe Rd was going out of business and they had a very short amount of time to have everything removed. The loading dock was in the basement and the bay door was two inches too short to get our tractor trailer in to load all the equipment out. The only way to get everything out was through a single door at the front of the building onto the sidewalk. We couldn’t get the truck there till two days later and we had to hot load it on the street, one of the busiest streets on the east coast. The truck would be there at 3am. In the mean time we had to dismantle everything in the restaurant, including a walk-in freezer, a walk-in cooler, fifty tables, and twenty hibachi grills. I never want to move another hibachi table ever again. Fred orchestrated the truck to get there half an hour after the door people removed the five thousand dollar custom glass door so we could get everything out of the building. The truck was late and there was maybe two hours before the police would get there and make us move, but not before they asked up why we had a semi-truck, a forklift, and a truck with a tilt deck trailer in front of a government building with no permits. Fortunately that didn’t happen and we got out of there in an hour and a half, smelling of old fish and rotten bok choy.

A lot of jobs happened this way. None of this is an exact science. On my better days I felt like a part of a black ops crack team. On my not so better days I seriously questioned my life decisions. None of it was ever boring, though. Not with Fred.

There was an Italian man who had a few restaurants around town. Crazy Frank we called him. He had just opened up a new restaurant and had an emergency with his ice machine and a pizza oven we rebuilt for him. Fred and I head over there at lunch. The kitchen is insane. I go over to the the oven and start to drill out holes on the door to put a handle on- bear in mind the oven is roaring at 600 degrees and has pizza in it. Fred is reprogramming the thermostat on the ice machine. It is the lunch rush and there are ten people running around, screaming in Italian. Fred asked me if I had a ‘big ass college word’ to describe the situation. I told him that I believed the word he was looking for was ‘asinine’.

“Right,” he says. “This shit is asinine”

The most memorable job I was on with Fred was a three day bakery extraction. Fred, myself, and our colleague and good friend Aaron were to fly to Nebraska, load an entire bakery into two tractor trailers, and then fly home. Adventures started at the airport. Fred and I are not fans of flying. At the airport bar I had forty dollar margarita with a cornucopia of liquor in it and Fred had two double shots of Jack Daniels. We got on the plane and promptly went to sleep. We arrived in Nebraska that evening, picked up a swanky rental car and went to look at the job.

The first thing I noticed was that it was cold. Like unbelievably cold. It hadn’t really hit me at the airport. This was January and I had never been anywhere that flat, windy, and cold before. The second thing I noticed was a gigantic rotating bread oven. Our client told us that it bakes 100 loaves an hour when loaded to capacity. We would spend the majority of our time dismantling that hulking behemoth. We got steaks for dinner, because that is what you do in Nebraska, and went to the hotel.

The next couple of days were stupidly cold. The forklift we rented wouldn’t start most of the mornings until the sun came out. We had to disconnect and extract the oven exhaust system, which meant going onto an icy sheet metal room. We had to take that oven apart, which had nearly a thousand 3/4″ screws holding it together. Fred was confident in his ability to get it all back together.

Everything went as it should, got loaded, and sent back to Virginia. Our travels were slightly rockier. There was an ice storm that closed the Chicago Midway Airport and we got diverted to Indianapolis where we sat on the tarmac for seven hours. Seven hours of Fred without a cigarette. Seven hours of Fred saying we should have rented a truck and driven to Nebraska. Seven hours of Fred telling anyone who would listen that no one could keep him on that plane. I was sitting next to a mother and her small child on their way to Disney World. The husband and another little one were sitting behind me with Fred. These little ones had a better grip on the situation than Fred. Finally they let us off to catch a different flight, on a plane that wasn’t covered in ice. It was all Aaron and I could do to keep Fred from using the company card to rent a truck and drive back to Virginia from Indianapolis. Two double shots of Jack got Fred back on a plane.

Left to right here is myself, Aaron, and Fred after three long, flour covered days in the cold. Happy to be finished, thank you very much.

Wild cards only work when you play them. They do what you need them to do when you need them to be done. This is Fred, and also the lesson of the Wild Card. I wanted to build something to be sent in when the job needed to be done.

I started with a big hunk of 1095 spring steel- 3/16″ thick

The blade is close to 8 inches long…
Rough grind:

I used a clay hardening technique to create a Hamon

Hardened…

…and tempered

Sanded to about 600 grit and ready to for a dip in the acid….

Curly Maple. You can faintly see the wavy bits of curl…

Clamped.

To get the curls to burst I had to go through many cycles of sanding and staining and sanding again. With each cycle the stain becomes more stable and prominent.

I cooked up a concoction using various finishes I have…